Router Configuration

1)Leased Line 

Convert NTC ADSL line to Leased Line

ISP connection type : Bridge Mode

Bridge Mode: VPI=0 , VCI=35

Connection type:1483 Bridge IP LLC

Proxy : 192.168.77.17  port : 80

Problem: gateway does not response

 solution:

2) Xiaomi Router 4C Configuration

Gateway:192.168.31.1

Use your WI-FI Password as your administrator password

WI-FI setting

SSID : Xiaomi_1COD

Encryption: Mixed (WPA/WPA2-Personal)

Password : enter any password you like

Network Setting

Connection: Static IP address

IP Address: 10.0.48.12

Subnet: 255.255.255.0

Gateway: 10.0.48.1

DNS: 192.168.0.2

3) ADSL Router configuration of NTC

 TP-LINK 150 Mbps Wireless N ADSL2+ Modem Router

Gateway: 192.168.1.1

username: admin

password: admin

Click on Quick Start...RUN WIZARD...Quick Start...NEXT...Time Zone...choose any time and click NEXT......

ISP Connection Type : select PPPoE/PPPoA and click NEXT

PPPoE/PPPoA 

Username: given by NTC

Password : As as username

VPI:8

VCI:81

Connection Type: PPPoE LLC

WLAN:

Access point: Activated

SSID: Give any Name you want

Broascast SSID : Yes

Authentication Type: WPA-PSK/WPA2-PSK

ENCRYPTION: TKIP/AES

Pre shared Key: type password then NEXT

Quick Start Complete..NEXT then Click on CLOSE. 

4)  NTC FTTH (Fiber to the Home)  (Huawei Router)
Gateway: 192.168.100.1
Account: root
Password: admin

To disable WLAN

         

 

 Printer Problem

1) Blinking error light in Dell printer

Solution : Paper might be inside the printer.

2) While networking printer, while installing software in other computer, says " Cannot connect to the printer"

Solution: Problem may be due to different platform (Windows 7, Windows 10)

Solution: Check workgroup,

3)  Operation could not be completed (error 0x00000709). Double check the printer name and make sure that the printer is connected to the network.

4) Your Connection was Interrupted. A network change was detected. ERR_NETWORK_CHANGED.

(Using TP-Link Wireless N Router WR841N).

solution: Change the router.

5) Windows cannot connect to the printer. operation failed with error OXOOOOO11b (HP printer) 

solution:- 

6)  Operation could not be completed (error 0X0000005) Access denied ( Canon LBP2900)

Network  (client windows 10 pro and server windows 7) : 

solution:

7) operation could not be completed (error 0x00000709). Double check the printer name and make sure that the printer is connected to the network. (client Windows 10 and Server Windows 7)

Solution: Restore the windows.

solution: Install fresh Windows ( don't update Windows)

 8) Brother printer HL-1210W (red light blinking)

printer off

press power button ON and power cable on

Open the cover

bring cartridge out

put cartridge in

leave power button  

press power button 9 times

 1/2 times

close cover

both light on

For test print:

press power button 3

How to run Canon lb6030  with out run file

Copy the software into desktop

Right click on my computer.....>Computer Management...............>Device manager---other devices---Update Driver Software--Browse my computer for drivers...browse then select the driver from the location

HP 107 ....unable to print message

Solution: check power if no sound change Chip

Windows Cannot connect

solution: In search  type credential > Credential Manager> Windows Credentials> click on Add a Windows Credentials

 

Canon image class 3010MF

For scanner : insert scanner tool